How To Install Airport Express Base Station

This is why we hang on to our old Apple gear. The hasn't seen any development in half a decade. But, with Tuesday's firmware update, these devices can now be used with the latest AirPlay 2. So dig out yours and prepare to do just the very tiniest amount of fiddling.What you're going to do is turn that AirPort Express from a Wi-Fi router into a client.

Rather than being the device all your Macs and iOS connect to in order to then get on the internet, you're effectively making it a Wi-Fi adaptor.So many devices come with their own built-in Wi-Fi adaptors but there are still printers, games consoles and sound systems that don't. As long as they do have either an Ethernet or a USB port, though, you can give them 802.11n Wi-Fi by plugging them into an AirPort Express.You do lose one thing, though Once your AirPort Express is set up this way, it can't be used as a router. Instead of having your internet line hard-wired into the AirPort Express which then shares the signal out over Wi-Fi, you're hard wiring the sound system in.Consequently, there's no point doing this at all if you're still relying on an AirPort Express as your Wi-Fi router.However, if you were still doing that, you should definitely upgrade. AirPort Express still uses the 802.11n standard where modern routers are on 802.11ac.

Ignoring what these two standards promise, in practice 802.11in gets you less than 15 percent the speed that an 802.11ac router does.If that doesn't get you ripping your 802.11n AirPort Express out then it's because you probably already have. Either way, you now have, or are soon going to have, a spare AirPort Express and this is what you do with them.Pick your deviceAs a species, we don't tend to print out as much as we used to but we can't get rid of printers yet.

So if you've still got a USB one, consider taking yours off your Mac and plugging it into an AirPort Express instead. That way every device in your place can print wirelessly to it.With print jobs you don't really care how long they take.

You don't want them to be slow, but a few seconds either way doesn't make a difference.With audio, it does but even these slow AirPort Express units are compatible with AirPlay 2.Start your EnginesPlug in the AirPort Express, and let it boot.Once it's running, connect your speakers, your printer, or both into the AirPort Express, and launch AirPort Utility on your Mac. If you already have an AirPort Express configured then it will show up on this map. Check that it has the latest firmware.

If the dot next to the name is green then you're fine. If it's yellow, then you don't have the latest but there will also be an Update button.When you've got the latest firmware installed, then take the AirPort Express back to basics.

Setup Airport Express As Extender

Select it, then in the Base Station menu, choose Restore Default Settings.Next, click on Other Wi-Fi Devices. It looks like a button but it's really a drop-down menu that will list all the AirPort-compatible devices that the utility can find either on Wi-Fi or Ethernet.

Choose your Wi-Fi router in question of any make and model, enter the password if prompted, and you're done. Your non-Wi-Fi-enabled device, or those speakers you love, are now on your Wi-Fi network.What's more, they're on your network and because you have the latest firmware, they are immediately able to benefit from AirPlay 2 without you doing anything else.Where to buyAlthough supplies are dwindling, shoppers can still get their hands on an AirPort Express Base Station at Adorama with free shipping and no tax collected on orders shipped outside New York and New Jersey.Keep up with AppleInsider by downloading the for iOS, and, Twitter and for live, late-breaking coverage. You can also check out our official account for exclusive photos.

I recently picked up Apple's latest AirPort Express base station for our house to replace my aging first-generation Express. On my drive home, I mentally began calculating the insanity of reconfiguring all our connected HomeKit devices with the new router, but it turns out I didn't need to: Apple provides a one-tap option for setting up your new AirPort to clone and replace your old network, no hassle required.Here's how you go about doing it. How to replace your router with an AirPort Express, AirPort Extreme, or Time Capsule. Plug in your new AirPort next to your old router.

Apple Airport Express Base Station

Don't move any wires just yet. On your iPhone, open Settings Wi-Fi and wait until you see the Set Up New AirPort Base Station field below Choose a Network. Tap on the new AirPort to join it. Once connected, it will automatically offer to extend your current network.

Tap Other Options and then tap Next to proceed. Select Replace an Existing Device. Choose whether the existing device is an older AirPort or a non-Apple router and press Next.

Select the Wi-Fi network your AirPort is replacing and enter its password, if necessary. Your AirPort will then copy over that station's settings. Once finished, it will prompt you to switch over any Ethernet wires you had connected to the old router.And with that, you're done!

Feel free to get rid of your old base station, or move it to another part of your house to extend your network.